Hot dip galvanized welded wire mesh is also known as external insulation wire mesh. After hot galvanizing, a thick zinc layer will be attached to the iron wire, making it highly resistant to corrosion. It is widely used to stabilize the external wall insulation effect of buildings. Let's first understand the common standard for hot-dip galvanized welded wire mesh used in external wall insulation: 0.9 ± 0.04 × twelve point seven × 12.7mm; Tensile strength: > 65; Hot dip galvanized layer >.
In the past, we have learned about the effect of hot-dip galvanized welded wire mesh in the insulation of external walls of buildings through the detailed construction process. Firstly, during construction, the welded grid polystyrene board is placed on the inner side of the external wall formwork to be poured, so that the external insulation board and the wall can survive at one time. After the formwork is removed, the insulation board and the wall are integrated. This not only saves manpower and time, but also reduces installation costs. Due to the large and light weight of the welded grid polystyrene plate used, it is easy to construct, and the external decoration surface can be used for facing bricks, which is easy to operate. Therefore, construction can also be suspended in winter.
Then, the insulation material is alkali resistant mesh cloth. The alkali resistant mesh cloth is made of medium alkali or alkali free glass fiber, and the outer layer is made of high molecular alkali resistant lotion, which is woven into mesh cloth after drying. Due to its function of resisting corrosion by chemical substances such as acid and alkali, and its high tensile strength in the longitude and latitude directions, it can evenly relax the pressure on the external wall insulation system, prevent the collision and kneading of external balance forces from forming deformation of the entire insulation structure, and provide a high balance force for the insulation layer, making it easy to construct and control quality.




