The question that everyone is concerned about is exactly what affects the quality of a product. In fact, it is not easy to distinguish the quality of welded wire mesh from the surface. The surface of the welded wire mesh we see is bundled, and whether there is rust on the surface can only be seen on the superficial side. If the real difference between the quality of the product depends on the raw material, the primary mesh is made of iron wire tied together.
What to choose from high-quality low-carbon steel wires is related to their internal carbon content. Those with a carbon content of less than 2% are referred to as steel, while those with a carbon content of more than 2% are referred to as iron. The higher the carbon content, the greater the hardness, and of course, the poorer the durability. Therefore, when selecting suitable products, it is also necessary to meet their own needs, so as to purchase a more satisfactory product. When selecting products, there are not only detailed types and standards.
Good, there are also corresponding property choices, which can buy cost-effective products. The difference mesh can also be seen from the following two points. First, the mesh welding should be strong. An electric welding net with weak welding points is like ordinary scrap iron, and no faulty or missing welding is allowed. For example, the total height of two 4mm mesh pieces should be between 6-7mm after welding for 8mm. "If the welding spot is too shallow, the welding will not be strong, and if the welding spot is too deep, the quality will also be unacceptable.".
