Galvanized welded wire mesh is formed by welding low-carbon steel wire into a welded wire mesh, and then undergoing electrical or hot galvanizing treatment. Galvanization removes oil and rust from the welded wire mesh. The welded wire mesh is hung onto the cathode of a specific electroplating tank, and zinc is used for the anode. When the DC power supply is turned on, the zinc ions on the anode will migrate to the cathode and discharge on the cathode, making the welding net plated with a zinc layer.
The plating layer is relatively thin, with a typical thickness of within 5-30 microns, so the anti-corrosion time is relatively short. The black wire welded wire mesh is formed by using a wire drawing machine to stretch the wire rod and then welding it using a wire welding machine. The advantages of galvanized welded wire mesh are flat mesh surface, average mesh size, solid solder joints, good machining performance, stability, corrosion resistance, and corrosion resistance. "Ordinary black wire welded nets are thicker than galvanized welded nets in diameter, and in terms of service life, galvanized welded nets are less prone to rust. Galvanized welded nets have a longer service life than black wire welded nets, and have a good gloss.".
The similarity between Dutch mesh and welded mesh is that they are both a type of metal wire mesh - metal welded mesh. Can be used as a guardrail net. "They can be processed with wires of the same material, but the difference is that the mesh of the welded wire mesh is not wavy, but square, and the wire diameter of the welded wire mesh can be higher.".




