
Specifications for welded wire mesh typically depend on the specific requirements of the project or application. However, there are several key factors to consider when specifying welded wire mesh.
If you need to specify welded wire mesh, then you need to provide the following data:
LENTH
WIDTH
WIRE THICKNESS
MESH OPENING
Product Processing
If you can't remember, then the picture and excel below can help you out:

| Mesh Opening | Wire Thickness | Width | |||
| Inch | MM | BWG | MM | Inch | M |
| 1/4 x 1/4 | 6 x 6 | 26; 25; 24; 23; 22; 21 | 0.45-0.80 | 12-48 | 0.3-1.2 |
| 3/8 x 3/8 | 10 x 10 | 26; 25; 24; 23; 22; 21; 20; 19 | 0.45-1.00 | 12-48 | 0.3-1.2 |
| 1/2 x 1/2 | 13 x 13 | 25; 24; 23; 22; 21; 20; 19; 18; 17; 16 | 0.50-1.65 | 12-80 | 0.3-2.0 |
| 5/8 x 5/8 | 16 x 16 | 25; 24; 23; 22; 21; 20; 19; 18; 17; 16 | 0.50-1.65 | 12-48 | 0.3-1.2 |
| 3/4 x 3/4 | 19 x 19 | 25; 24; 23; 22; 21; 20; 19; 18; 17; 16 | 0.50-1.65 | 12-80 | 0.3-2.0 |
| 1/2 x 1 | 13 x 25 | 22; 21; 20; 19; 18; 17; 16; 15; 14 | 0.70-2.10 | 12-80 | 0.3-2.0 |
| 1 x 1 | 25 x 25 | 22; 21; 20; 19; 18; 17; 16; 15; 14 | 0.70-2.10 | 12-80 | 0.3-2.0 |
| 1-1/4 x 1-1/4 | 30 x 30 | 20; 19; 18; 17; 16; 15; 14; 13; 12 | 0.90-2.80 | 12-80 | 0.3-2.0 |
| 1-1/2 x 1-1/2 | 40 x 40 | 20; 19; 18; 17; 16; 15; 14; 13; 12 | 0.90-2.80 | 12-80 | 0.3-2.0 |
| 1 x 2 | 25 x 50 | 19; 18; 17; 16; 15; 14; 13; 12 | 1.00-2.80 | 12-80 | 0.3-2.0 |
| 2 x 2 | 50 x 50 | 18; 17; 16; 15; 14; 13; 12 | 1.20-2.80 | 12-80 | 0.3-2.0 |
| 2 x 3 | 50 x 75 | 16; 15; 14; 13; 12 | 1.60-2.80 | 12-80 | 0.3-2.0 |
| 2 x 4 | 50 x 100 | 16; 15; 14; 13; 12 | 1.60-2.80 | 12-80 | 0.3-2.0 |
| 3 x 3 | 75 x 75 | 16; 15; 14; 13; 12 | 1.60-2.80 | 12-80 | 0.3-2.0 |
| 3 x 4 | 75 x 100 | 16; 15; 14; 13; 12 | 1.60-2.80 | 12-80 | 0.3-2.0 |
| 4 x 4 | 100 x 100 | 16; 15; 14; 13; 12 | 1.60-2.80 | 12-80 | 0.3-2.0 |
| 6 x 6 | 150 x 150 | 16; 15; 14; 13; 12 | 1.60-2.80 | 12-80 | 0.3-2.0 |
PVC Coated Welded Wire Mesh
If you need to specify welded wire mesh, then you need to provide the following data:
LENTH
WIDTH
WIRE THICKNESS
MESH OPENING
Product Processing
If you can't remember, then the picture and excel below can help you out:

| Mesh Opening | Wire Thickness | Width | ||
| Inch | MM | MM | Inch | M |
| 1/4 x 1/4 | 6 x 6 | 0.45/0.80 - 0.60/1.00 | 12-48 | 0.3-1.2 |
| 3/8 x 3/8 | 10 x 10 | 0.45/0.80 - 0.80/1.20 | 12-48 | 0.3-1.2 |
| 1/2 x 1/2 | 13 x 13 | 0.50/0.85 - 1.20/1.60 | 12-80 | 0.3-2.0 |
| 5/8 x 5/8 | 16 x 16 | 0.55/0.90 - 1.20/1.60 | 12-48 | 0.3-1.2 |
| 3/4 x 3/4 | 19 x 19 | 0.55/0.90 - 1.20/1.60 | 12-80 | 0.3-2.0 |
| 1/2 x 1 | 13 x 25 | 0.55/0.90 - 1.20/1.60 | 12-80 | 0.3-2.0 |
| 1 x 1 | 25 x 25 | 0.60/1.00 - 1.60/2.00 | 12-80 | 0.3-2.0 |
| 1-1/4 x 1-1/4 | 30 x 30 | 0.60/1.00 - 1.60/2.00 | 12-80 | 0.3-2.0 |
| 1-1/2 x 1-1/2 | 40 x 40 | 0.90/1.30 - 1.60/2.00 | 12-80 | 0.3-2.0 |
| 1 x 2 | 25 x 50 | 1.00/1.40 - 2.20/2.60 | 12-80 | 0.3-2.0 |
| 2 x 2 | 50 x 50 | 1.20/1.60 - 2.20/2.60 | 12-80 | 0.3-2.0 |
| 2 x 3 | 50 x 75 | 1.60/2.00 - 2.20/2.60 | 12-80 | 0.3-2.0 |
| 2 x 4 | 50 x 100 | 1.60/2.00 - 2.20/2.60 | 12-80 | 0.3-2.0 |
| 3 x 3 | 75 x 75 | 1.60/2.00 - 2.20/2.60 | 12-80 | 0.3-2.0 |
| 3 x 4 | 75 x 100 | 1.60/2.00 - 2.20/2.60 | 12-80 | 0.3-2.0 |
| 4 x 4 | 100 x 100 | 1.60/2.00 - 2.20/2.60 | 12-80 | 0.3-2.0 |
Just provide the data according to the above, and we will be able to produce the welded wire mesh that meets your requirements. If you can't decide on the data, then you can tell our sales about your application requirements and our sales will be happy to provide you with a solution.




